APRS Track Direct

My position About ☰

reset

HS4IOO Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS4IOO. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TEMP*	HUM*	BAR*	BAT*
1766797413	30.27 °C	45.6 %RH	1006.5 hPa	4.11 V
1766796813	30.51 °C	45.6 %RH	1006.3 hPa	4.12 V
1766796213	30.01 °C	46.9 %RH	1006 hPa	4.19 V
1766795613	29.79 °C	46.8 %RH	1005.8 hPa	4.19 V
1766795013	30.04 °C	46.2 %RH	1005.6 hPa	4.19 V
1766794413	31.53 °C	44.3 %RH	1005.5 hPa	4.19 V
1766793813	31.31 °C	44.8 %RH	1005.3 hPa	4.19 V
1766793213	31.21 °C	45.2 %RH	1005.1 hPa	4.18 V
1766792613	30.84 °C	45.6 %RH	1005 hPa	4.18 V
1766792013	30.39 °C	46.2 %RH	1004.9 hPa	4.18 V
1766791413	29.69 °C	47.2 %RH	1004.8 hPa	4.18 V
1766790813	28.69 °C	48.8 %RH	1004.7 hPa	4.17 V
1766790213	28.67 °C	48.8 %RH	1004.6 hPa	4.12 V
1766789613	29.15 °C	47.8 %RH	1004.4 hPa	4.14 V
1766789013	28.98 °C	48 %RH	1004.3 hPa	4.19 V
1766788412	28.95 °C	47.8 %RH	1004.2 hPa	4.19 V
1766787813	29.23 °C	47 %RH	1004.2 hPa	4.18 V
1766787213	29.67 °C	46 %RH	1004.1 hPa	4.19 V
1766786612	29.84 °C	46 %RH	1003.9 hPa	4.19 V
1766786012	29.84 °C	46.1 %RH	1003.8 hPa	4.18 V
1766785412	29.94 °C	46.3 %RH	1003.7 hPa	4.18 V
1766784812	30.29 °C	46.7 %RH	1003.8 hPa	4.18 V
1766784212	30.38 °C	46.9 %RH	1003.8 hPa	4.18 V
1766783612	30.92 °C	45.3 %RH	1003.7 hPa	4.1 V
1766783012	30.76 °C	45.8 %RH	1003.7 hPa	4.12 V

*Used Equation Coefficients:

TEMP: 0, 0.01, 0

HUM: 0, 0.1, 0

BAR: 0, 0.1, 800

BAT: 0, 0.01, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)