This is the latest recevied telemetry packets stored in our database for station/object KC3ARY. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery Voltage* | Battery Current* | Load Current* | Solar Voltage* | Solar Current* |
|---|---|---|---|---|---|
| 1766768428 | 13.91 V | -59 mA | -241 mA | 15.45 V | 318 mA |
| 1766766641 | 13.62 V | -35 mA | -241 mA | 15.13 V | 299 mA |
| 1766766384 | 13.81 V | -66 mA | -242 mA | 15.35 V | 325 mA |
| 1766764844 | 13.91 V | -75 mA | -245 mA | 15.45 V | 337 mA |
| 1766764657 | 13.27 V | -11 mA | -249 mA | 14.76 V | 286 mA |
| 1766764447 | 13.77 V | -29 mA | -248 mA | 15.3 V | 300 mA |
*Used Equation Coefficients:
Battery Voltage: 0, 0.01, 0
Battery Current: 0, 1, -4096
Load Current: 0, 1, -4096
Solar Voltage: 0, 0.01, 0
Solar Current: 0, 1, -4096
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)