This is the latest recevied telemetry packets stored in our database for station/object UB1ATP-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | LoadAvg5m* | MemUsed* | Temp* | AudioLvl* | Value5* |
|---|---|---|---|---|---|
| 1766826192 | 0.3 | 3 % | 34 C | 94 | 0 |
| 1766825292 | 0.3 | 3 % | 34 C | 95 | 0 |
| 1766824392 | 0.3 | 3 % | 33 C | 94 | 0 |
| 1766823492 | 0.3 | 3 % | 33 C | 94 | 0 |
| 1766822592 | 0.3 | 3 % | 31 C | 93 | 0 |
| 1766821693 | 0.3 | 3 % | 30 C | 95 | 0 |
| 1766820793 | 0.3 | 3 % | 30 C | 94 | 0 |
| 1766819893 | 0.3 | 3 % | 30 C | 95 | 0 |
| 1766818993 | 0.3 | 3 % | 28 C | 95 | 0 |
| 1766818093 | 0.3 | 3 % | 28 C | 94 | 0 |
| 1766817192 | 0.2 | 3 % | 21 C | 95 | 0 |
| 1766816293 | 0.3 | 3 % | 29 C | 96 | 0 |
| 1766815392 | 0.3 | 3 % | 29 C | 96 | 0 |
| 1766814492 | 0.3 | 3 % | 29 C | 95 | 0 |
| 1766813592 | 0.3 | 3 % | 29 C | 96 | 0 |
| 1766812692 | 0.3 | 3 % | 31 C | 97 | 0 |
| 1766811792 | 0.3 | 3 % | 29 C | 81 | 0 |
| 1766810892 | 0.3 | 3 % | 30 C | 79 | 0 |
| 1766809992 | 0.3 | 3 % | 30 C | 80 | 0 |
| 1766809093 | 0.3 | 3 % | 28 C | 83 | 0 |
| 1766808193 | 0.3 | 3 % | 30 C | 83 | 0 |
| 1766807293 | 0.3 | 3 % | 28 C | 84 | 0 |
| 1766806393 | 0.3 | 3 % | 30 C | 84 | 0 |
| 1766805493 | 0.4 | 3 % | 29 C | 84 | 0 |
| 1766804593 | 0.3 | 3 % | 30 C | 80 | 0 |
*Used Equation Coefficients:
LoadAvg5m: 0, 0.1, 0
MemUsed: 0, 1, 0
Temp: 0, 1, 0
AudioLvl: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)